Brief Introduction
Pumpcrete for sale philippines can transport the concrete continuously along the pipe under the pressure. The pumpcrete for sale philippines is to install the pump body on the chassis and equip with the stretchable concrete placing boom. Pumpcrete is popular in Philippines. The reason is that it has its own chassis, which is convenient to transfer among different construction sites.
Moreover, it is equipped with placing boom, reducing the time of connecting the pipelines. So the pumpcrete philippines plays an important role on the building construction, bridge construction, factory project, high speed rail project, etc. Learn the pumpcrete philippines price information by clicking here.
Parameter |
TMBP30 |
||
Whole truck |
Drive way |
4×2 |
|
Engine |
Yuchai |
||
Output power/speed (kw/rpm) |
177/2000 |
||
Emission standard |
Euro V |
||
Tire size |
11.00R20 16PR |
||
Arm & leg |
Vertical height (m) |
29.7 |
|
Horizontal length (m) |
25.9 |
||
Vertical depth (m) |
15.5 |
||
Fold type |
M (four arms) |
||
Rotary angle (°) |
±360 |
||
Pumping system |
Theoretical pumping pressure (MPa) |
Low pressure |
8.5 |
High pressure |
10.5 |
||
Distribution valve |
S valve |
||
Delivery cylinder inner diameter/stroke (mm) |
230/1450 |
||
Hopper capacity (m3) |
0.65 |
||
Feeding height (mm) |
1450 |
||
Pipe diameter (mm) |
125 |
||
Maximum aggregate size (mm) |
40 |
Features of pumpcrete for sale philippines
-
Small and flexible.
Our pumpcrete truck for sale adopts the full z-type placing boom, which has a small opening height and a short opening and rewinding time. It is very suitable for construction in factory and workshops with limited height and space, and can be used for large-scale construction at the same time.
-
Good quality.
The pumping system of truck mounted pumpcretegenerally adopts flexible installation, which can reduce the impact on the bottom frame and concrete piston wear and tear, and at the same time, it can eliminate the fault efficiently through the fault self-diagnosis system.
-
Long distance transportation and don’t be affected by the travel conditions.
The advantages of pumpcrete machine for sale philippines are all the more apparent in bad weather when the construction site is overwhelmed by factors such as muddy roads and workers have to trek. Combination of the concrete pump and the extension pipe allows the pumpcrete equipment to complete the long distance pumping, so our pumpcrete for sale can work normally even in bad conditions.
-
High automatic degree and convenient to operation.
This pumpcrete for sale philippines generally adopts the intelligent boom system, which can be easily controlled by one key, and realize the boom vertical or horizontal automatic pouring.
Successful cases for your reference
30M Pumpcrete Truck Works In Philippines
Transport Five Sets of Pumpcrete Machines To Manila, Philippines
Parameter |
TMBP22 |
TMBP25 |
TMBP30 |
TMBP33 |
TMBP38 |
||
Whole truck |
Drive way |
4×2 |
4×2 |
4×2 |
4×2 |
4×2 |
|
Engine |
Yuchai |
Yuchai |
Yuchai |
Yuchai |
Man |
||
Output power/speed (kw/rpm) |
147/2000 |
147/2000 |
177/2000 |
177/2300 |
228/2300 |
||
Emission standard |
Euro V |
Euro V |
Euro V |
Euro V |
Euro V |
||
Tire size |
9.00R20 16PR |
9.00R20 16PR |
11.00R20 16PR |
11.00R20 |
12.00R20 |
||
Arm & leg |
Vertical height (m) |
21.9 |
25.5 |
29.7 |
33 |
38 |
|
Horizontal length (m) |
18.1 |
21.7 |
25.9 |
29.5 |
33.2 |
||
Vertical depth (m) |
|
|
15.5 |
19 |
22 |
||
Fold type |
M (three arms) |
M (four arms) |
M (four arms) |
5RZ |
5RZ |
||
Rotary angle (°) |
±360 |
±360 |
±360 |
±360 |
±360 |
||
Pumping system |
Theoretical pumping pressure (MPa) |
Low pressure |
8.5 |
8.5 |
8.5 |
8 |
8 |
High pressure |
10.5 |
10.5 |
10.5 |
12 |
12 |
||
Distribution valve |
S valve |
S valve |
S valve |
S valve |
S valve |
||
Delivery cylinder inner diameter/stroke (mm) |
200/1200 |
200/1200 |
230/1450 |
230/1600 |
230/1600 |
||
Hopper capacity (m3) |
0.65 |
0.65 |
0.65 |
0.5 |
0.5 |
||
Feeding height (mm) |
1450 |
1450 |
1450 |
1450 |
1450 |
||
Pipe diameter (mm) |
125 |
125 |
125 |
125 |
125 |
||
Maximum aggregate size (mm) |
40 |
40 |
40 |
40 |
40 |
Choose a right model of pumpcrete machines
Our customers come from all over the world and they use our pumpcrete truck for sale for different projects. Different projects have different requirements for the length of concrete placing boom. The lengths of our concrete placing boom includes 22m, 25m, 30m, 33m, 37m, 44m, 47m, 50m, 58m and 62m. You can pick up a suitable model of pumpcrete machine for sale depending on your real needs. What’s more, different model of pumpcrete machine for sale is equipped with different chassis model. Or if you have already had a chassis, we also can just provide you with the concrete placing boom.
Selecting a right model of pumpcrete for sale, besides the lengths of concrete placing boom and the types of chassis, you also need to consider the type of project and the pumping output per hour. These parameters are important for a pumpcrete. Moreover, you need to notice the brand of its components. Good components can greatly guarantee the quality of pumpcrete for sale philippines and reduce its failure rate.
If you still have any question for choosing a right machine, welcome to consult us at any time. We will reply you as soon as possible.
Parameter |
TMBP25 |
||
Whole truck |
Drive way |
4×2 |
|
Engine |
Yuchai |
||
Output power/speed (kw/rpm) |
147/2000 |
||
Emission standard |
Euro V |
||
Tire size |
9.00R20 16PR |
||
Arm & leg |
Vertical height (m) |
25.5 |
|
Horizontal length (m) |
21.7 |
||
Vertical depth (m) |
|
||
Fold type |
M (four arms) |
||
Rotary angle (°) |
±360 |
||
Pumping system |
Theoretical pumping pressure (MPa) |
Low pressure |
8.5 |
High pressure |
10.5 |
||
Distribution valve |
S valve |
||
Delivery cylinder inner diameter/stroke (mm) |
200/1200 |
||
Hopper capacity (m3) |
0.65 |
||
Feeding height (mm) |
1450 |
||
Pipe diameter (mm) |
125 |
||
Maximum aggregate size (mm) |
40 |
Notice something when use the pumpcrete for sale philippines
Before driving, you should check out the condition of the truck mounted pumpcrete. There are some suggestion for you.
- Make sure that the concrete placing boom has been completely closed and fixed, otherwise do not drive on the road;
- Check that the legs of the pumpcrete are in place and that the leg locks are tight;
- Check the closing and sealing of the oil tank and water tank of pumpcrete. No leakage is allowed;
- Carry out safety inspection on concrete pump chassis (e.g. brake system, steering system, lighting system, tire pressure, etc.);
- Check the surface of pumprete truck tire, if double tire, check if there is any debris between them;
- Switch the chassis to driving condition.
TMBP47 concrete pump truck
large size of pump
Parameter |
TMBP38 |
TMBP42 |
TMBP47 |
TMBP50 |
TMBP58 |
||
Whole truck |
Drive way |
6×4 |
6×4 |
6×4 |
6×4 |
8×4 |
|
Engine |
Yuchai |
Yuchai |
Yuchai |
Yuchai |
MC11.44-50 |
||
Output power/speed (kw/rpm) |
243/2100 |
243/2100 |
243/2100 |
243/2100 |
327/1900 |
||
Emission standard |
Euro V |
Euro V |
Euro V |
Euro V |
Euro V |
||
Tire size |
11.00R20 |
11.00R20 |
11.00R20 |
11.00R20 |
385/65R22 5/315/80R22.5 |
||
Arm & leg |
Vertical height (m) |
38 |
40.1 |
47 |
50 |
57.6 |
|
Horizontal length (m) |
34.1 |
36 |
42 |
46 |
52 |
||
Vertical depth (m) |
22.8 |
23.6 |
29.4 |
36.2 |
38 |
||
Fold type |
5RZ |
5RZ |
5RZ |
6RZ |
6RZ |
||
Rotary angle (°) |
±360 |
±360 |
±360 |
±360 |
±360 |
||
Pumping system |
Theoretical pumping pressure (MPa) |
Low pressure |
8 |
8 |
8 |
8 |
8.5 |
High pressure |
12 |
12 |
12 |
12 |
12 |
||
Distribution valve |
S valve |
S valve |
S valve |
S valve |
S valve |
||
Delivery cylinder inner diameter/stroke (mm) |
230/1600 |
230/1650 |
260/1800 |
260/1600 |
260/2200 |
||
Hopper capacity (m3) |
0.5 |
0.5 |
0.6 |
0.6 |
0.6 |
||
Feeding height (mm) |
1450 |
1450 |
1450 |
1450 |
1500 |
||
Pipe diameter (mm) |
125 |
125 |
125 |
125 |
125 |
||
Maximum aggregate size (mm) |
40 |
40 |
40 |
40 |
40 |
Why choose our Daswell Machinery?
If you want to purchase a high quality pumpcrete for sale philippines, our Daswell Machinery company is trustworthy. Compared with other pumpcrete suppliers philippines, the reasons why you choose our company are as follows.
Rich experience. Accumulate about 30 years production experience, ensuring the quality of you pumpcrete.
Trustworthy team. We have professional research and development team and production team. Advance technology and machine makes you get a satisfied pumpcrete truck.
Strict standard and inspection system. Before transporting our machines to our customers, we will inspect them strictly according to standard, ensuing that our customers can get our pumpcrete machine for sale philippines in a good condition.
Considerate service. Besides affordable pumpcrete price and better product, you can enjoy our thoughtful and sincere service. From choosing right model to installing it, you all don’t worry at all.
To sum up, if you want to buy a pumpcrete for sale philippines, contact us now.
FAQs
-
How many boom sections does a pump truck usually have?
The number of booms is different for different models of pump trucks. For example, a 30m pump has a four-section boom, a 38m pump has a five-section boom.
-
What is the form of your outrigger?
Our Daswell boom pumps, no matter which model, all adopt the front X rear swing form of legs.
-
How far can a 30m pump truck generally pump?
Generally speaking, a 30m pumpcrete truck can pump up to the height of a three-story building.
-
What is the chassis of the 30m pump truck with?
Generally, we match the 30m pump truck with 4*2 Dongfeng chassis. If you need, we can also match the chassis of Heavy Duty Truck. We can match different brands of chassis depending on your demand.
-
30 meters of pump truck can be equipped with 6*4, that is, 10 wheels of the chassis?
Yes, no problem.
-
If I want to pump to the height of a five-story building, which model of pump truck do you
recommend?
Based on our experience, we would recommend you the 47m pumpcrete truck philippines. It is the most cost effective.
-
How do you normally ship your pump trucks?
Generally speaking, the pump truck needs to be loaded with 40-frame containers or go by ro-ro ship or bulk carrier.
-
Can we just have the top-mounted boom without the chassis?
Yes, we can provide only the top loading boom to the customer, the customer can buy the chassis locally and then assemble them.
-
What is the size of your largest pump truck?
So far, the largest pump truck we have produced is the 62m.
-
How long is the typical delivery time of a pumpcrete for sale?
The delivery time for our pump trucks is usually about 30 days. Please rest assured that we will transport the machine to the destination port specified by the customer on time.